Contact Us
Telephone
01908 613 256
Email
sales@detaillighting.co.uk
Address
Unit 1, Bringewood Forge, (off Tanners Drive), Blakelands, Milton Keynes, MK14 5FJ
Book a lighting design consultation
Contact Us
Telephone
01908 613 256
Email
sales@detaillighting.co.uk
Address
Unit 1, Bringewood Forge, (off Tanners Drive), Blakelands, Milton Keynes, MK14 5FJ
Book a lighting design consultation
London
+) 22 256 7890
architecture@hub.com
Find Us
290 Maryam Springs 260,
Courbevoie, Paris, France
Type and hit enter
Detail Lighting designs and supplies architectural lighting for commercial offices across London and the wider UK, and runs a London showroom where specifiers can see fittings performing in real conditions before committing them to a scheme. Understanding what lighting standards apply to UK commercial office design is the starting point for any office project, because the standards set the illuminance, glare control, energy performance and safety provision a scheme has to deliver.
Here, we discuss the standards and regulations that govern office lighting in the UK, what each one asks for, and how they work together on a live project.
Office lighting is controlled for two reasons: the welfare of the people using the space and the energy the building consumes. Badly lit offices cause visual discomfort, glare on screens and fatigue across a working day. Over-lit or inefficient schemes waste energy and can fail Building Regulations at completion.
The standards fall into two groups. Some are mandatory, set by the Building Regulations and health and safety law. Others are guidance documents that specifiers work to because they represent the accepted quality benchmark for the sector. A compliant office scheme addresses both from the outset rather than treating comfort and efficiency as competing goals.
BS EN 12464-1 is the primary reference for interior workplace lighting in the UK. The current version, BS EN 12464-1:2021, superseded the 2011 edition and sets recommended maintained illuminance and quality criteria for different task areas. It is guidance rather than law, but it is the document specifiers use to define light levels across an office.
Illuminance is measured on the task area, on the working plane, typically around 0.75 metres above floor level. Typical office figures include:
The standard also controls the quality of the light, not just the quantity. Three criteria matter most in offices:
The 2021 revision also sets requirements for the areas around the task. The immediate surround should sit at no less than half the task illuminance, and the background at no less than a third, each with its own minimum uniformity. This prevents a bright desk sitting in a dim, high-contrast space.
Approved Document L covers the conservation of fuel and power and is mandatory for new offices and many refurbishments. It controls how efficiently the lighting installation uses energy, and it is checked at completion.
For new office lighting, the guidance sets a minimum average efficacy of 95 luminaire lumens per circuit watt for general lighting, and 80 lamp lumens per circuit watt for display lighting. Efficacy is measured at the luminaire, so the figure accounts for the fitting, the driver and any losses, not just the bare light source.
Controls carry equal weight. Part L expects automatic controls that turn general lighting off when a space is unoccupied, typically through presence detection, along with provision to respond to available daylight. The associated control guidance draws on BRE Digest 498. Meeting the efficacy figure alone will not satisfy Part L if the controls strategy is missing.
Emergency lighting is a separate, mandatory requirement. Approved Document B (fire safety) requires escape routes to be adequately lit if the normal supply fails, and BS 5266-1 is the code of practice that sets out how to design and install it.
For offices this generally means illuminating escape routes, changes of direction, stairs, exit signs, fire alarm call points and firefighting equipment to defined minimum levels for a set duration, usually three hours. Emergency lighting is designed alongside the general scheme, not added afterwards, because luminaire positions and escape routes have to be coordinated.
Two pieces of legislation sit behind the technical standards.
Regulation 8 requires every workplace to have suitable and sufficient lighting, and that it should be natural light so far as is reasonably practicable. This is the legal duty that BS EN 12464-1 helps an employer discharge in practice.
The DSE Regulations require workstations to be assessed, which includes lighting and reflections on screens. This is why glare control and the choice of luminaire matter as much as raw lux levels in an office where most work is screen-based.
The Chartered Institution of Building Services Engineers (CIBSE) and its Society of Light and Lighting (SLL) publish the guidance most UK lighting designers work to. The SLL Code for Lighting consolidates recommended illuminance and quality criteria, and Lighting Guide 7 (LG7) deals specifically with offices.
These documents are not law, but Part L itself points designers towards the CIBSE SLL guidance as an accepted method. Specifying to LG7 is a practical way to demonstrate that a scheme meets recognised industry practice for offices.
Some clients set targets beyond the regulatory minimum. The WELL Building Standard and BREEAM both award credits for lighting quality, including daylight provision, glare control, circadian support and colour rendering.
These are optional, but where a developer is pursuing a rating, the lighting scheme has to be designed to the relevant credit criteria from the start. Retrofitting compliance late in a project is costly and often not possible.
On a real office scheme these documents are not applied in isolation. BS EN 12464-1 defines the light levels and quality the space needs. Part L caps the energy the installation is allowed to use to deliver them. BS 5266-1 covers what happens when the power fails. Health and safety law sets the legal duty underneath.
The tension usually sits between light quality and energy performance. Hitting 500 lux at UGR 19 while staying within 95 luminaire lumens per circuit watt takes efficient luminaires, considered layout and a controls strategy that dims and switches with occupancy and daylight. Getting the specification right at design stage is what keeps a scheme compliant, comfortable and efficient once it is in use.
Detail Lighting works with architects, M&E consultants and fit-out contractors to specify office lighting that meets these standards. Specifiers can view fittings under real conditions at the London showroom before finalising a scheme.
If you require lighting schemes for your project
get in touch with our team
Adding {{itemName}} to cart
Added {{itemName}} to cart